Full Node Build

Chain ID: comdex-1 | Current Node Version: v10.0.0

Install Go

Install Go

We will use Go v1.19.3 as example here. The code below also cleanly removes any previous Go installation.

sudo rm -rvf /usr/local/go/
wget https://golang.org/dl/go1.19.3.linux-amd64.tar.gz
sudo tar -C /usr/local -xzf go1.19.3.linux-amd64.tar.gz
rm go1.19.3.linux-amd64.tar.gz

Configure Go

Unless you want to configure in a non-standard way, then set these in the ~/.profile file.

export GOROOT=/usr/local/go
export GOPATH=$HOME/go
export GO111MODULE=on
export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin

Build Daemon from source

Install the current version of node binary.

git clone https://github.com/comdex-official/comdex.git
cd comdex
git checkout v10.0.0
make install

Configure Node

Initialize Node

Please replace YOUR_MONIKER with your own moniker.

comdex init YOUR_MONIKER --chain-id comdex-1

Download Genesis

wget https://comdex-mainnet-genesis.s3.ap-southeast-1.amazonaws.com/genesis.json

mv genesis.json ~/.comdex/config/genesis.json

This will replace the genesis file created using comdex init command with the mainnet genesis.json.

Configure Seed

Using a seed node to bootstrap is the best practice in our view. Alternatively, you can use addrbook or persistent_peers.

sed -i 's/seeds = ""/seeds = "[e-mail]:13156,aef35f45db2d9f5590baa088c27883ac3d5e0b33@3.108.102.92:26656,7ca14a1d156299999eba9c394ca060368022d52f@54.194.178.110:26656"/' ~/.comdex/config/config.toml

Update Node configs

We can use sed to update various node configuration values without having to manually edit each file - which can be a pain.

Replace the values below with your own. These commands will update the following:

• minimum_gas_prices

• pruning configs

• snapshot configs

sed -i -e "s|^minimum-gas-prices *=.*|minimum-gas-prices = \"0.0021ucmdx\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^pruning *=.*|pruning = \"custom\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^pruning-keep-recent *=.*|pruning-keep-recent = \"113\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^pruning-keep-every *=.*|pruning-keep-every = \"0\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^pruning-interval *=.*|pruning-interval = \"17\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^snapshot-interval *=.*|snapshot-interval = \"0\"|" $HOME/.comdex/config/app.toml
sed -i -e "s|^snapshot-keep-recent *=.*|snapshot-keep-recent = \"2\"|" $HOME/.comdex/config/app.tom

Updating node ports

We'll use a powerful tool called sed for this process. sed is a stream editor that can perform operations, like substitutions, on a text file.

We will specifically focus on updating the ports to use a standardized prefix for your chain. This ensures consistency and improves overall system organization. It will also allow you to run multiple chains on a single server.

Let's start by understanding what we're updating:

• proxy_app: This is the address used for inter-process communication between the ABCI application and the consensus engine.

• laddr: This is the address that your node listens on for incoming connections.

• pprof_laddr: This is the address for the profiling server to listen on.

• prometheus_listen_addr: This is the address for the Prometheus metrics server to listen on.

• address: These are various addresses that your node may use to listen for different types of connections.

Set Your Chain and Port Prefix

Your chain in this case is Comdex. For Comdex, we want to set the port prefix as 101. The port prefix will be used to replace the first 2 or 3 digits of the original ports.

# Set the prefix 
export PREFIX=101

Update config.toml

Next, we will update the config.toml file. For 5-digit ports, the first 3 digits will be replaced. Here is how to calculate the new port values and update the config.toml file:

PROXY_APP_PORT=$(echo 26658 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
LADDR_PORT1=$(echo 26657 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
LADDR_PORT2=$(echo 26656 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
PPROF_LADDR_PORT=$(echo 26660 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
PROMETHEUS_LISTEN_PORT=$(echo 26660 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')

sed -i.bak -e "\
s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:$PROXY_APP_PORT\"%; \
s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://0.0.0.0:$LADDR_PORT1\"%; \
s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:$PPROF_LADDR_PORT\"%; \
s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:$LADDR_PORT2\"%; \
s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":$PROMETHEUS_LISTEN_PORT\"%" \
$HOME/.comdex/config/config.toml

Update app.toml

For 4-digit ports, the first 2 digits will be replaced. Here is how to calculate the new port values and update the app.toml file:

sed -i.bak -e "\
s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:$ADDRESS_PORT1\"%; \
s%^address = \":8080\"%address = \":$ADDRESS_PORT2\"%; \
s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:$ADDRESS_PORT3\"%; \
s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:$ADDRESS_PORT4\"%" \
$HOME/.comdex/config/app.toml

ADDRESS_PORT1=$(echo 1317 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT2=$(echo 8080 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT3=$(echo 9090 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT4=$(echo 9091 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')

Create (or restore) a local key pair

Either create a new key pair or restore an existing wallet for your validator:

# Create new keypair
comdex keys add <YOURKEY>

# Restore existing juno wallet with mnemonic seed phrase.
# You will be prompted to enter mnemonic seed.
comdex keys add <YOURKEY> --recover

# Query the keystore for your public address
comdex keys show <YOURKEY> -a

After creating a new key, the key information and seed phrase will be shown. It is essential to write this seed phrase down and keep it in a safe place. The seed phrase is the only way to restore your keys.

Setup cosmovisor

Follow the Setup Cosmovisor instructions to setup cosmovisor and start the node.

Upgrade to a validator

Do not attempt to upgrade your node to a validator until the node is fully in sync as per the previous step.

To upgrade the node to a validator, you will need to submit a create-validator transaction:

comdex tx staking create-validator \
  --amount 1000000ucmdx \
  --commission-max-change-rate "0.1" \
  --commission-max-rate "0.20" \
  --commission-rate "0.1" \
  --min-self-delegation "1" \
  --details "validators write bios too" \
  --pubkey=$(comdex tendermint show-validator) \
  --moniker $MONIKER_NAME \
  --chain-id comdex-1 \
  --gas-prices 0.025ucmdx \
  --from <KEYNAME>

The above transaction is just an example. There are many more flags that can be set to customise your validator, such as your validator website, or keybase.io id, etc. To see a full list:

comdex tx staking create-validator --help

Backup critical files

There are certain files that you need to backup to be able to restore your validator if, for some reason, it damaged or lost in some way. Please make a secure backup of the following files located in ~/.comdex/config/:

• priv_validator_key.json

• node_key.json

It is recommended that you encrypt the backup of these files.