Full Node Build

Install pre-requisites

# update the local package list and install any available upgrades
sudo apt-get update && sudo apt upgrade -y

# install toolchain and ensure accurate time synchronization
sudo apt-get install make build-essential gcc git jq chrony -y

Install Go

Follow the instructions here to install Go.

For an Ubuntu LTS, we can use:

# find location of existing GO (if any)
which go
go version

# remove old GO if existing
sudo rm -rf /usr/local/go

# install updated GO
wget https://golang.org/dl/go1.20.6.linux-amd64.tar.gz
sudo tar -C /usr/local -xzf go1.20.6.linux-amd64.tar.gz
rm -rf go1.20.6.linux-amd64.tar.gz

Unless you want to configure in a non standard way, then set these in the .zshrc in the user's home (i.e. ~/) folder.

nano ~/.zshrc

Add the "export Pathing" rules at the bottom, and then save the file:

# add export PATHS below
export GOROOT=/usr/local/go
export GOPATH=$HOME/go
export GOBIN=$GOPATH/bin
export PATH=$PATH:$GOROOT/bin:$GOBIN

After updating your ~/.zshrc you will need to source it:

source ~/.zshrc

Build Daemon from source

git clone https://github.com/envadiv/Passage3D passage
cd passage
git checkout v2.0.0
make install

To confirm that the installation has succeeded, you can run:

passage version --long

Configure the Node

Initialize Node

The command below will initialize the node, and generate a random 32-bit string for the node moniker. This provides increased privacy from tools like Observatory.

passage init $(openssl rand -hex 16) --chain-id passage-2

Download Genesis

curl -s https://raw.githubusercontent.com/envadiv/mainnet/main/passage-2/genesis.json > ~/.passage/config/genesis.json

This will generate the following files in ~/.passage/config/

genesis.json
node_key.json
priv_validator_key.json

Set Seeds

We can add these seeds to our config.toml:

sed -i 's/seeds = ""/seeds = "ad9f93c38fafff854cdd65741df556d043dd6edb@5.161.71.7:26656,fbdcc82eeacc81f9ef7d77d22120f4567457c850@5.161.184.142:26656"/' ~/.passage/config/config.toml

Update Node configs

We can use sed to update various node configuration values without having to manually edit each file - which can be a pain.

Replace the values below with your own. These commands will update the following:

minimum_gas_prices
pruning configs
snapshot configs

sed -i -e "s|^minimum-gas-prices *=.*|minimum-gas-prices = \"0upasg\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^pruning *=.*|pruning = \"custom\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^pruning-keep-recent *=.*|pruning-keep-recent = \"113\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^pruning-keep-every *=.*|pruning-keep-every = \"0\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^pruning-interval *=.*|pruning-interval = \"17\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^snapshot-interval *=.*|snapshot-interval = \"0\"|" $HOME/.passage/config/app.toml
sed -i -e "s|^snapshot-keep-recent *=.*|snapshot-keep-recent = \"2\"|" $HOME/.passage/config/app.toml

Updating node ports

We'll use a powerful tool called sed for this process. sed is a stream editor that can perform operations, like substitutions, on a text file.

We will specifically focus on updating the ports to use a standardized prefix for your chain. This ensures consistency and improves overall system organization. It will also allow you to run multiple chains on a single server.

Let's start by understanding what we're updating:

proxy_app: This is the address used for inter-process communication between the ABCI application and the consensus engine.
laddr: This is the address that your node listens on for incoming connections.
pprof_laddr: This is the address for the profiling server to listen on.
prometheus_listen_addr: This is the address for the Prometheus metrics server to listen on.
address: These are various addresses that your node may use to listen for different types of connections.

Set Your Chain and Port Prefix

Your chain in this case is Passage. For Passage, we want to set the port prefix as 102. The port prefix will be used to replace the first 2 or 3 digits of the original ports.

# Set the prefix 
export PREFIX=102

Update config.toml

Next, we will update the config.toml file. For 5-digit ports, the first 3 digits will be replaced. Here is how to calculate the new port values and update the config.toml file:

PROXY_APP_PORT=$(echo 26658 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
LADDR_PORT1=$(echo 26657 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
LADDR_PORT2=$(echo 26656 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
PPROF_LADDR_PORT=$(echo 26660 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')
PROMETHEUS_LISTEN_PORT=$(echo 26660 | awk -v prefix=$PREFIX '{print prefix substr($0,4)}')

sed -i.bak -e "\
s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:$PROXY_APP_PORT\"%; \
s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://0.0.0.0:$LADDR_PORT1\"%; \
s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:$PPROF_LADDR_PORT\"%; \
s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:$LADDR_PORT2\"%; \
s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":$PROMETHEUS_LISTEN_PORT\"%" \
$HOME/.passage/config/config.toml

Update app.toml

For 4-digit ports, the first 2 digits will be replaced. Here is how to calculate the new port values and update the app.toml file:

ADDRESS_PORT1=$(echo 1317 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT2=$(echo 8080 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT3=$(echo 9090 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')
ADDRESS_PORT4=$(echo 9091 | awk -v prefix=$PREFIX '{print prefix substr($0,3)}')

sed -i.bak -e "\
s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:$ADDRESS_PORT1\"%; \
s%^address = \":8080\"%address = \":$ADDRESS_PORT2\"%; \
s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:$ADDRESS_PORT3\"%; \
s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:$ADDRESS_PORT4\"%" \
$HOME/.passage/config/app.toml

Create (or restore) a local key pair

Either create a new key pair or restore an existing wallet for your validator:

# Create new keypair
passage keys add YOURKEY

# Restore existing juno wallet with mnemonic seed phrase.
# You will be prompted to enter mnemonic seed.
passage keys add YOURKEY --recover

# Query the keystore for your public address
passage keys show YOURKEY -a

After creating a new key, the key information and seed phrase will be shown. It is essential to write this seed phrase down and keep it in a safe place. The seed phrase is the only way to restore your keys.

Setup cosmovisor

Follow the Setup Cosmovisor instructions to setup cosmovisor and start the node.

Upgrade to a validator

Do not attempt to upgrade your node to a validator until the node is fully in sync as per the previous step.

To upgrade the node to a validator, you will need to submit a create-validator transaction:

gaiad tx staking create-validator \
  --amount=1000000uatom \
  --pubkey=$(gaiad tendermint show-validator) \
  --moniker="choose a moniker" \
  --chain-id=$CHAIN_ID" \
  --commission-rate="0.10" \
  --commission-max-rate="0.20" \
  --commission-max-change-rate="0.01" \
  --min-self-delegation="1000000" \
  --gas="auto" \
  --gas-prices="0.0025uatom" \
  --from=<key_moniker>

The above transaction is just an example. There are many more flags that can be set to customize your validator, such as your validator website, or keybase.io id, etc. To see a full list:

passage tx staking create-validator --help

Backup critical files

There are certain files that you need to back up to be able to restore your validator if, for some reason, it damaged or lost in some way. Please make a secure backup of the following files located in ~/.passage/config/:

priv_validator_key.json
node_key.json

It is recommended that you encrypt and backup of these files.

PreviousPassage NextSetup Cosmovisor

Last updated 1 year ago